514 EUROSAFE LINO

Product Typification

Linoleum adhesive with a high initial grab.

Basis	:	Synthetic resin dispersion.
Colour	:	Beige.
Consistency	:	Thick liquid.

Product advantages:

Non-flammable
Good moisture resistance
High initial adhesion strength
Favourable spreading capacity
Roller-castor-chair resistant
Very low emission
EMICODE EC 1PLUS
Emission-tested construction product according to DIBt principles.
Declared by baubook, "ecological building product".

Performances

Consumption	:	400 - 450 g/m².
Curing	:	Approx. 24 hours.*
Flammability	:	Non-flammable.
Specific weight	:	1.45 kg/l.

Application

Application:

For installing:

linoleum in sheets
corkment.

Working Process

Tools	:	Eurocol spreader no. 850/B1 (TKB).
Open time	:	15 - 20 minutes.*
Waiting time	:	None.
Curing	:	Approx. 24 hours.*
Storage	:	Store cool and free from frost.
Shelf Life	:	Approx 15 months, in unopened packaging. After use close the open packaging well.
Cleaner	:	Water.
Sensitive to frost	:	Yes.
Remarks	:	Please pay attention to the technical data sheet issued by the floor covering manufacturer. Relevant norms and regulations of the branch are to be respected. Outside Germany relevant national regulations are to be applied which must be known by the user. Allow the floor covering to be acclimatized before laying. The laying materials must be relaxed and plane. Welding the seams should be done once the adhesive has been dry but not sooner than 48 - 72 h after the installation. For inlaid work and linoleum in tiles we recommend using Eurocol 611 Eurostar Linoleum Plus. EMICODE, more informations under www.emicode.com. Wear protective gloves / eye protection.

* The mentioned values have been established in our laboratory and must be considered as guidelines in view of possible variations in climatic circumstances, subfloor compositions and layer thickness.

Consumption:
400 - 450 g/m².

Substrate:

514 Eurosafe Lino is suitable for any type of subfloor that has a good tensile and compression strength.
The subfloor should also be even, clean, permanently dry and free from grease and dirt, according to the requirements of BS 8203 or DIN 18 365.
When installing on impervious subfloors apply a 2 mm levelling compound layer.
In advance always seek our technical data sheets. In doubt about the application ask for technical advice.

User manual:

Apply the adhesive with a regular notched adhesive spreader (Eurocol spreader no. 850/B1) (when installing Colovinyl use adhesive spreader no. 852/A2).
On absorbent subfloors apply the floor covering directly into the wet adhesive. On low absorbent subfloors keep a waiting time of approx. 10 minutes.
Roll the floor covering carefully; first widthwise, then lengthwise.
Do not double-stick bight marks. Lay bight marks into the wet adhesive as usual.
Sheet-ends, bight marks and longitudinal joints are to be pressed firmly.
On low absorbent subfloors and/or when circumstances are less ideal, rolling and pressing should be repeated after approx. 15 minutes.
Remove fresh adhesive spots immediately with water.

Working conditions:
Required surrounding temperature : 18 - 23 °C.
Temperature for material and subfloor : min. 15° - max. 20 ºC.
Relative humidity : 40 - 80%.

Further information:

Keep out of reach of children.
Keep area thoroughly ventilated during and after processing and drying.
When processing do not eat, drink or smoke.
In case of contact with eyes or skin, rinse immediately with plenty of water.
Do not empty into drains, surface water or onto soil.
Only hand in packaging without rest material for recycling purposes. Dried rest material can be disposed of as domestic waste..
Product residues and cleaning water drains according to local applicable environmental rules and do not drain in the sewer.
Avoid contact with eyes and skin and use proper protecting equipment (see our safety sheet).

Underfloor heating systems:
514 Eurosafe Lino can be applied on underfloor heating systems. The startprotocol of the floorheating needs to be completly executed in accordance with the directives of the supplier. Turn off the heater 24 Underfloor heating systems:hours before application. Do not heat again until at least 24 hours after installation, in steps of maximum 5 °C water temperature per day.

Contains methylchloroisothiazolinone and methylisothiazolinone (3:1) and benzisothiazolinone. May produce an allergic reaction.

Quality and guarantee

Environment and health

GISCODE	:	D1
LEED	:	VOC 0 g/l, meets: IEQ Credit 4.1
DGNB	:	VOC 0 %, quality level: 4
Hazard Class	:	None.
Safety and environment	:	Safety data sheets of Forbo Eurocol products according to EEG-guideline 91/155. Keep out of reach of children. Do not eat, drink or smoke while processing the product. Only give completely empty containers for recycling. Bound material residues can be disposed of as household waste.
MSDS	:	For extensive information about safety and environment we refer to our website www.eurocol.nl.
Substances causing allergy	:	Contains reaction mass of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2- methyl-2H-isothiazol-3-one [EC no. 220-239-6] (3:1), 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction.

Articles

Article	Definition	Packaging	EAN-code
514	Eurosafe Lino	14 kg Bucket	8 710345 514101

SelectYourLanguage

Forbo Websites

Select a division

eurocol
514 EUROSAFE LINO