SelectYourLanguage

Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2

Forbo Websites

Select a division
Forbo Group
Forbo Flooring Systems
Forbo Movement Systems
CONTACT FAQ

eurocol
740 ISOFLEX 2K

740

A flexible, cement-based, 2-component sealing compound for waterproofing of mineral surfaces on balconies, swimming pools and terraces where tiling is to be applied. Suitable for indoor and outdoor use on walls and floors.

730-isoflex-sk.jpg
  • pdf-product-specification.pdf

    pdf-product-specification.pdf

  • Product Typification
    A flexible, cement-based, 2-component sealing compound for waterproofing of mineral surfaces on balconies, swimming pools and terraces where tiling is to be applied. Suitable for indoor and outdoor use on walls and floors.
    Basis : Liquid polymer dispersion with a very high content of synthetic binders to be mixed with cement powder. Component A: B 20 : 15.
    Colour : Grey.

    Product advantages:
    • Single-layer system
    • Waterproof
    • Highly elastic
    • Frost-resistant
    • Crack-bridging
    • Suitable for walls and floors
    • For indoors and outdoors

  • Performances
    Classification : Highest class according to NEN-EN 14891 CMO2P, high-performance, cement-based, liquid-applied waterproof membrane for use under ceramic tiling with crack-bridging capability at low temperatures (-20 °C) with resistance to chlorinated water. To be used in conjunction with a high-performance cement-based C2 adhesive compliant with NEN-EN 12004.
    Consumption : Approx. 3 kg/m² per applied layer of 4 mm (see instructions).
    Flammability : Non-flammable.
    Humidity resistance : Water-resistant after drying, making it very suitable for use in “wet areas”, outdoors and underwater (swimming pools).
    Passableness : Approx. 5 hours at 18° - 20 °C.*
  • Application
    • For waterproofing of mineral surfaces on balconies and terraces where tiling is to be applied.
    • For protecting concrete reinforcement (e.g. in swimming pools) against moisture penetration, reducing the risk of efflorescence.
    • For sealing of mineral walls to prevent moisture penetration, e.g. in heavily used shower areas.
    • As a decoupling layer on critical surfaces, such as wood and existing tiling.
    • To allow gradual drying of freshly poured sand-cement screeds and to protect them against moisture ingress.

  • Working Process
    Tools : Notched trowel and smoothing spatula or filling knife.
    Mixing ratio : 20 kg 740 Isoflex 2K to 15 litres of supplied liquid polymer dispersion.
    Application temperature : Above 5 °C.
    Processing time : Within 30 minutes after mixing.*
    Storage : Store cool and dry in unopened packaging.
    Shelf Life : 12 Months, in unopened packaging. After use close the open packaging well
    Drying : Minimum 12 hours.*
    Moisture resistance : Water-resistant after drying, making it very suitable for use in “wet areas”, outdoors and underwater (swimming pools).

    * The mentioned values have been established in our laboratory and must be considered as guidelines in view of possible variations in climatic circumstances, subfloor compositions and layer thickness.

    Consumption:
    Approx. 3 kg/m² per applied layer of 4 mm (see instructions).

    Substrate:
    • 740 Isoflex 2K can be applied to any rigid, pressure-resistant and tear-resistant mineral surface. The surface must also be clean, dry and free from grease and dirt.
    • Mineral absorbent surfaces (e.g. sand/cement screeds) should be pre-treated with 099 Dispersion Primer. Minimum drying time: 1–2 hours.
    • Holes and deep damage in dry indoor situations should be pre-filled with 955 Wandostuc or, in outdoor situations, with 923 Europlan Extreme (floor) or 658 Wandoforte (wall).
    • Always consult our technical product information sheets beforehand. In case of doubt about the application, contact our Technical Advisory department in advance.


    User manual:
    • Add 20 kg of 740 Isoflex 2K to the 15 litres of mixing liquid in a tall 35-litre mixing tub, then mix the mortar intensively for 4 minutes using a mechanical mixer (approx. 1,000 rpm) until it is lump-free. Let the mortar rest for 2 minutes, then briefly remix before application.
    • Apply 740 Isoflex 2K in an 8×8 mm notched layer to the surface. Smooth the ridges immediately with a smoothing spatula or filling knife to create a closed layer.
    • In the dry state, the layer of 740 Isoflex 2K must be at least 3 mm thick.
    • Protect the entire surface against adverse weather conditions (e.g. moisture, frost) starting from the application until the final layer has set.
    • For ceramic tiling, we recommend using 733 Superior S2 or 705 Watertight Tile Adhesive.
    • Clean any dirt from the surface before gluing the tiles.




  • Quality and guarantee
  • Environment and health
    MSDS : For comprehensive safety and environmental information, please refer to our website at www.eurocol.nl.


    Environment and health

    • The plastic bucket is fully recyclable. Only return packaging free of residues for recycling. Dried material residues can be disposed of with household waste.


  • Articles
    ArtikeldefinitionPackagingEAN-code
    740Isoflex 2K 35 kg combination  

    		Component A 20 kg bag 8 710345  740104  

    		Component B 15 kg bucket 8 710345  740203