• Self adhesive
• L-shaped for a perfect connection between floor and wall or skirting
• Easy application
• Elastic and rot-free
• Moisture resistant
• No dirty walls or skirting after levelling
• Watertight angle connection possible between wall and floor in combination with a suitable DPM
• Reduction of horizontal noise after levelling
• Protective function during polishing the walls or skirting 

• For inside use
• For any type of subfloor that is clean, permanently dry and free from grease and dust
• Can be used if the skirting is already applied
• In combination with 021 Euroblock Reno it is possible to realise a watertight wall/floor connection
• Place before levelling prevent dirt and damage to wall or skirting
• Wall protective function during polishing the floor
• Reduces noise transfer at wall connections and to adjoining surroundings
• Multifunctional application free-floating subfloors floors. Absorbs expansion and shrikage. Reduses noise 

• 806 Eurostrip Profile is suitable for any type of subfloor that is clean, permanently dry and free from grease and dust. The subfloor should also be clean, permanently dry and free from grease and dirt acoording to the requirements of DIN 18365.
• Prime crumbing subfloors with 044 Europrimer Multi, 049 Europrimer ABS or 099 Dispersionprimer.
• In advance always seek our technical data sheets. In doubt about the application ask for technical advice.

Working conditions:

Required surrounding temperature : min. 15º - max. 25º C
Temperature for material and subfloor : min. 15º - max. 25º C
Relative humidity : 40 - 70%

Directions for use: 

• Pull the protection strip of the 806 Eurostrip Profile and place the 806 Eurostrip Profile on the floor in the angle between floor and wall.
• If it is necessary the strip can be folded or cur in the angels.
• Levelling is possible immediately after placing the 806 Eurostrip Profile.
• After drying and polishing of the levelling compound cut the surplus 806 Eurostrip Profile and place the floor covering.
• If a watertight wall-connection is desirable, apply two layers 021 Euroblock Reno on the subfloor and 806 Eurostrip Profile. As usual, aggrecate blind the second layer of 021 Euroblock Reno with 846 Quartzsand while it is still wet. It is not necessary to to use the Quartzsand on the 806 Eurostrip Profile. With tjis application we recommend to place the 806 Eurostrip Profile behind the skirting and not to cut the surplus of.