• Ready-to-use, odourless roller primer for parquet.
• Before using Eurocol parquet varnishes with blocking effect against wood ingredients that can lead to varnish adhesion problems and discolouration.
• Especially suitable for smoked oak, corc and common exotic woods. Ideal for their new installation.
• Also for use as a primer in parquet renovations of all types of wood.
• GISCODE W2+, NMP-free
• Emission-tested building product according to DIBt principles.

• The surfaces to be sealed must be clean and free of residues of oil, wax, silicone and other adhesion-reducing layers.
• Joints are closed with suitable Eurocol joint sealant.
• The fine sanding depends on the type of wood. The surface and edge sanding must be levelled with a sanding grid.
• In case of defects, reservations must be made in writing.

Before use, temper the product according to the processing conditions.

• Shake well before use!
• Preferably decant the varnish into a Eurocol sealing bucket and use a scraper grid when applying.
• The application has to be done with a clean Eurocol Aqua microfibre roller 25 cm.
• Smoked oak, steamed beech, merbau, wenge, acacia and other highly absorbent wood species should be rolled twice.
• During application on the prepared parquet floor, use shoe covers for the shoes to avoid footprints.
• After complete drying, seal with Eurocol water-based varnishes.

During the drying process, ensure even ventilation. Avoid draughts and direct sunlight.

Working conditions:
Required surrounding temperature: min. 18°C.
Material and subfloor temperature: min. 15°C.
Relative humidity: 35 - 75%, recommended <65%.