SelectYourLanguage

Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2

Forbo Websites

Select a division
Forbo Group
Forbo Flooring Systems
Forbo Movement Systems
CONTACT FAQ

eurocol
872 SURFACE FINISH ADDITIVE R10

872

Lacquer additives,
achieves slip class R10 with surface finish.

872_2017.jpg
  • pdf-product-specification.pdf

    pdf-product-specification.pdf

Product Typification

TODO
Basis : Ceramic powder.
Colour : White.
Consistency : Powder.

Product advantages:
  • Additives to achieve the slip class R10 according to German BGR 181.
  • For addition in approved and tested Eurocol Surface Finish products.

Performances

Flammability : Non-flammable.
Frost resistance : yes.
Special quality : Evaluation group R10 in combination with surface laquer..
Specific weight : 1,1 g/cm³.

Application

Application:
Additive for Eurocol Surface Finish. 

Working Process

Mixing ratio : 3%, 155 g/5 l Surface finish laquer.
Storage : Store cool and dry in unopened packaging.
Shelf Life : Approx 36 Months, in unopened packaging.
Frost-proof : yes.
Remarks : Observe the technical information and safety data sheets of any laying materials used!
Not suitable for conductive floor coverings.TODO

* The mentioned values have been established in our laboratory and must be considered as guidelines in view of possible variations in climatic circumstances, subfloor compositions and layer thickness.

User manual:
  • Temper the product. Shake component A in the original container well and empty it completely into a clean plastic mixing container.
  • To produce the slip class R10, add the Eurocol 872 Surface finish Additive R10 to the appropriate Eurocol surface finish product and mix it thoroughly by stirring in slowly, then add the hardener. 
  • To achieve the slip class R10, 3% of the Eurocol 872 Surface finishing additive needs to be added.
  • Add the hardener component B by stirring completely to the premix of the component A and additives. Stir the components for at least three minutes with an electric mixer to a homogeneous mixture. Let the mixture rest for 1o minutes then stir again briefly.
  • Apply the coating evenly, acc. To the processing instructions of the surface finishing products used. Apply surface finishing additives R10 only in the last coat of the lacquering system.
  • When applying it on the floor, use shoe covers to avoid footprints.
  • The mixture of the additives must be processed within the pot life. Keep stirring the mixture regularly.




Environment and health

Safety and environment : Safety data sheets of Forbo Eurocol products according to EEG-guideline 91/155. Keep out of reach of children. Do not eat, drink or smoke while processing the product. Only give completely empty containers for recycling. Bound material residues can be disposed of as household waste.
MSDS : For extensive information about safety and environment we refer to our website www.eurocol.nl.


Articles

articelproductnamepackagingshipping unit
872Surface Finish Additive R10PE bottle à 0,31 kg
720/pallet