• Highly hard-wearing, dirt-repellent, anti-slip polymer dispersion according to DIN 18032.
• For the initial care of handcrafted parquet sealed with Eurocol water-based varnish.
• Also suitable for sports flooring made of PVC or linoleum flooring.
• After careful basic cleaning, it can be used to refresh the sports flooring to maintain the required sliding friction.
• Extends the life of the floor covering/sealing of parquet.
• Regenerates the existing coating during maintenance care and fills light scratches.
• For interior use.

The sealing of parquet floors must be completely closed.

Coarse dirt must first be removed by sweeping or vacuuming.

Before use, temper the product according to the processing conditions.

• Shake carefully before use.
• The material can be applied with a lint-free cloth or weasel.
• Apply undiluted 1 - 2 times on the lined and freshly sealed or professionally cleaned floor. In the case of highly absorbent and open-pored floors, more coats may be useful to obtain a closed film.
• Always coat the surface to be treated in one go to avoid build-up.

The intermediate drying time is 1 - 2 hours at normal room climate, after that it can be walked on. If heavy loads are expected "overnight", allow to dry for approx. 12 hours.

• When using as a refresher for worn floors, make sure that old floors are carefully freed from old separating and care product residues (carry out professional basic cleaning). The floor must be left to dry for at least 12 - 24 hours.
  to leave.

Processing conditions: 

at least 15 °C floor temperature,
at least 18°C material and room temperature,
35-75% relative humidity, recommended <65%.