• Very high-quality, universal, very low-stress setting, self-levelling compound, cement-based.
• For very high loads.
• For levelling mineral subfloors, ceramic tiles, natural stone coverings, terrazzo, screwed wood-based panels (V100 P4 - P7, OSB 2 - 4) and fixed planks as well as mastic asphalt and on approved Eurocol decoupling boards (e.g. 823 Eurofloor Reno).
• Can also be used as a substrate under Eurocol Surface products.
• Can be used in layer thicknesses up to 20 mm, on mastic asphalt up to 5 mm, on decoupling boards (e.g. 823 Eurofloor Reno) up to 10 mm.
• For subsequent floor covering work and the laying of parquet.
• Can be stretched with up to 30% 846 Europlan Sand, grain size 0.4 - 1.0 mm (not for parquet work).
• The product can be used on underfloor heating and is suitable for use with chair castors according to DIN EN 12529.
• For interior use.
• Very low emission laying material, certified according to EMICODE EC1 Plus.
• Low emission, low solvent according to Blue Angel UZ 113.
• declared by baubook, "ecological building product".

• The substrate must be permanently dry, pressure- and tension-resistant, free of cracks and dust, even, and free of adhesion-reducing layers.
• Adhesion-reducing layers, old material residues must be removed by suitable mechanical means in accordance with the specifications of DIN 18365/DIN 18356.
• Cracks or joints (except for structural expansion joints) are to be closed with Eurocol grouting compounds Europlan 913 Silicate.
• Old hard-wearing floors, such as ceramic tiles, terrazzo, stone floors, must be cleaned professionally with Eurocol 891 Euroclean Basic and sanded to a matt finish after drying.
• Prime with a Eurocol primer adapted to the substrate and the expected layer thickness of the leveling compound. Allow the applied primer to dry thoroughly.
• Appropriately dimensioned Eurocol edge strips must be placed towards rising building components. 
• Level out coarse unevenness in advance with stable filling compound. After complete drying, prime the surface again.
• In case of defects, concerns must be raised in writing.

• Add 25 kg of 960 Europlan Super to 6 - 6.5 litres of cool and clean tap water.
• Stir the mortar, using an electric stirrer, to a smooth and homogeneous mixture.
• Wait for approx. 3 minutes and stir the mortar once again, with a low rpm.
• Apply the mortar within 30 minutes on the floor with a trowel or notched squeegee. By using a squeegee and a spiked de-airing roller, a smooth, even surface is achieved that usually does not require sanding.
• When pumping adjust the mixing-unit in such way that per 25 kg of 960 Europlan Super 6 - 6.5 litres of cool and clean tap water will be added. Determine the spreading dimension! Also flush machine and pipes during breaks to prevent hardening within the machine system. Please consult your pump manufacturer.
• Protect fresh levelling compound layers against draft and direct sunlight.
• In the case of multi-layer levelling, apply an intermediate primer to the fully set first levelling compound before applying the second levelling compound, alternatively use a levelling compound formulated for the required layer thickness in order to levelling in one operation.
  

Working conditions:
Required surrounding temperature  : minimum 18 °C.
Temperature subfloor : minimum 15 ºC.
Relative humidity : 35 - 75%, required < 65%.