Allura Puzzle
Adhesive-free interlocking puzzle shaped luxury vinyl tile. Allura Puzzle is quick and easy to install without the need for adhesive, with the advantage that they are also easy to remove, re-use and recycle.
Want new floors but worried about time, cost, and labour?
Forbo Allura Puzzle interlocking vinyl tiles are the missing piece of your puzzle! 🧩
✔ Unique puzzle-shaped vinyl tile that easily interlocks using a mallet
✔ Strong connection with minimal and clean join visual
✔ Superb dimensional stability
✔ Minimal subfloor preparation – can reduce installation time by over 50%
✔ A temporary or permanent flooring solution – easy to remove and reuse
No adhesives or special tools are needed! Often all that is required to install is a mallet and basic cutting tools!
Immediately after installation, the floor can be used. Allura Puzzle is factory-equipped with a hard-wearing PUR surface finish. The result is an easy to clean floor with reduced maintenance costs.
Allura Puzzle tiles are 96 × 96 cm with a 0.7 mm wear layer and a thickness of 5 mm.
Superb dimensional stability and build up, plus our special production process, ensure the tiles stay flat no matter what – a key essential for adhesive free floor coverings. The tiles are also suitable for high traffic areas due to their strong puzzle connection.
Available in 18 contemporary wood and concrete designs, with selected colours locally stocked in Australia. Allura Puzzle is perfect for areas such as supermarkets, offices, or other retail spaces where there is a need for speedy installation, temporary floors or quick removals without subfloor damage.
Find your local supplier for an obligation free quote
1. Choose a tile from the overview of colours & designs below
2. You will be forwarded to the product page
3. Click “Order a sample”
4. Fill in your details to receive the sample
Selected colours are locally stocked in Australia for quick delivery*
Floorcovering replacement should take place as quickly, cleanly and quietly as possible without disrupting ongoing operations. Chiselling out old tiles or long drying times are now taboo as Allura Puzzle offers a solution to these challenges.
Just like any other floor covering, Allura Puzzle requires a subfloor that is ready to be laid, but under certain conditions solid, level, and dry old subfloors can also be covered.
Laying begins in the middle of the room based on a plan. The square tiles are laid monolithically, i.e., cross-jointed, loosely on the subfloor – without the use of adhesives. The edges of the Allura Puzzle tiles have connectors on four sides. This ensures that the tiles are connected to one another according to the dovetail principle.
For assembly, the connectors are closed flush with a rubber mallet, starting from the corners, without tilting. A gap of 3 to 5 millimetres should be planned for walls, door frames and other finishes. Straight cuts are made by scoring the surface with a trapezoid blade, then folding it over and finishing with a hook blade. Round cuts, for example on pillars, are easier to make if the floor covering is heated beforehand.
Downtimes play a decisive role in existing buildings in particular: the faster the renovation is completed, the shorter the interruption to operations. There is often a requirement to renew closed-off partial areas during ongoing operation. The large-format tiles (96 × 96 cm) with extensive project suitability wear layer 0.70 mm are easy to lay and yet powerful in use.
When the Edeka Reske store was renovated, replacing the floor covering was not actually an issue. However, in the course of the renovation it became apparent that the old soapstone tiles did not harmonise with the modern shop design concept. So the floor also needed a new look, but no time was planned to change the surface. Allura Puzzle came to the rescue: After only three days – from the order to the finished installation – the store design appeared to be of one piece and the store manager was extremely satisfied.