Seleziona una nazione

Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2

surestep
balance

Surestep Balance è la nostra gamma più recente, con un disegno minimalista appena accennato e una finitura opaca. Rappresenta alla perfezione la nostra filosofia “progettare per un obiettivo”. Infatti è creata specificamente per reparti e spazi con pazienti affetti da Alzheimer.

Il sottile effetto maculato e la nuova goffratura satinata conferiscono a questo pavimento un aspetto opaco e asciutto, ideale per ambienti che devono avere un’atmosfera senza stimoli eccessivi e con riflessi dell’illuminazione ridotti al minimo.

173062 silt

Spessore 2 mm
Spessore strato d'usura 0,7 mm
Lunghezza x Larghezza ≤ 27 m x 200 cm
NCS (identificativo cromatico) S 1502-G
LRV (riflessione della luce) 61%
% di riciclato 24%
Energia elettrica rinnovabile 100%
  • Commerciale: molto intenso
  • Industria leggera: intenso
  • Reazione al fuoco
  • Resistenza allo scivolamento
  • Posa a direzione alternata
  • Resistenza allo scivolamento con acqua e sapone EN 13845 ESf
173062 silt

Surestep Balance

    Step slip resistance explained

    Durable anti slip flooring
    A sustainable, lifetime non-slip performance as a result of particles throughout the matrix of the floor covering is the requirement to comply with EN 13845. This standard specifies the requirements that must be met to ensure durable slip resistance in varying degrees of usage intensity. All Step floors comply with EN 13845 international slip safety standards.

    Ramp test
    Floors are often evaluated on slip resistance performance by using the R-scale, which is linked to the DIN 51130 standard. Measuring slip resistance on a ramp covered with oil at different angles and thereby resulting in different classes of slip. Step safety flooring is covering the most relevant classes of R10 to R12, in a comprehensive range of non slip floors that are used in conditions where footwear is the standard.

    Barefoot flooring
    For products used in barefoot areas, DIN 51097 applies. The testing method is similar to that of DIN 51130, but this time the product is flooded with a ‘soap and water’ solution, a testing method that is more relevant to the barefoot application.

    The Step range offers unique anti slip flooring solutions up to the highest class in barefoot safety performance. By choosing the right Step floor for the right application one can prevent the potential for accidents caused by slipping significantly.

    In the below document you can read which Step floor suits your application best
    Step safety flooring what to use where

    Step slip resistance graphic

    Referenze