• Primer to be diluted with water for priming of absorbent and non-absorbent, mineral-based subfloors, wooden composites, mastic asphalt before levelling or adhesion works.
• Water resistant, especially for application of levelling compound in thick layers. Ensures overall equal absorbency.
• Fast film building and drying.
• Can be applied on underfloor heating systems.
• For indoor use.
• Very low emission certified EMICODE EC1 Plus.
• Low emission, low solvent according to Blue Angel UZ 113.
• Declares by baubook, "ecological building product".

• as a dust-binding primer on absorbent surfaces,
• as adhesion promoter on dense substrates

before filling or gluing work.

• The substrate must be pressure- and tension-resistant, permanently dry, free of cracks and dust, even and free of layers that reduce adhesion.
• Adhesion-reducing layers, old material residues must be removed by suitable mechanical measures in accordance with the specifications of DIN 18365/DIN 18356.
• Old fixed floors, such as ceramic tiles, terrazzo, stone floors, must be thoroughly cleaned and sanded matt after drying.
• Cracks or joints (except structural expansion joints) are to be closed with Eurocol Europlan 913 Silicate sealing compound.
• In case of defects, objections are to be reported in writing.

• Shake the container before use!
• Before application, let product acclimatize to room temperature.
• Depending on the application area, dilute and mix carefully.
• Apply evenly without creating puddles.
• The drying time depends on the quantity applied, as well as the room temperature and humidity. Let the primer fully dry before continuing further.

Pay attention to the table:

For intermediate priming of cementitious, self-levelling or stable levelling compounds in their multi-layer installation, the first levelling layer must be completely dry. The intermediate primer is applied with a dilution of 1:5 with water!

For direct bonding of textile flooring on standard screed, dilute 1:5 (water) to bind residual dust.

After dilution, use the resulting mixture immediately. The shelf life is limited by dilution.

Working conditions:
Required surrounding temperature: min. 18°C.
Material and subfloor temperature: min. 15°C.
Relative humidity: 35 - 75%, recommended <65%.