015 EUROBLOCK MS

Water-free 1-component SMP moisture barrier. For blocking capillary moisture on absorbent cementitious substrates up to 4 CM %, 95% RF. Blocking in only one operation. Easy application method with defined quantity. Contains no components capable of migration. No need to mix with a hardener to avoid hardening losses or possible mixing errors.

Productinformation

021 EUROBLOCK RENO LE

Two-component damp proof coating. Damp proofing without moisture limit. water-free. Very low emissions and odorless.

Productinformation

023 EUROBLOCK FAST

2-component, fast-setting and solvent-free epoxy primer, applicable as a moisture barrier on clean, waterproof, stony surfaces. Apply at least two layers using an A2 notched trowel due to the relatively short pot life of approx. 10 minutes. To ensure good adhesion of the leveling compound, immediately broadcast the second, still wet layer to full opacity with 846 Quartzsand (gross consumption 4 kg/m², net consumption 1.5 kg/m²) or allow the second layer to dry thoroughly and prime with an adhesive layer 044 Europrimer. Multi. The residual moisture percentage in the subfloor may not exceed 6.0% (CM). Suitable for indoor use.

Productinformation

026 EUROBLOCK MULTI

Universal moisture barrier for sealing out residual moisture and rising damp in sand-cement floors (first allow monolith floors to be exposed to light). When applied in 2 layers, suitable under, for example, linoleum. When applied in 3 layers, suitable under vapour-tight floor coverings such as PVC and rubber. The first layer should be applied diluted 1:1 with water. The residual moisture percentage in the subfloor may not exceed 4.0% (CM) during installation. Suitable for indoor use. Thanks to EMICODE EC 1PLUS (very low emission) also suitable for BREEAM projects.

Productinformation

028 EUROBLOCK RAPID

2-Componenten epoxy primer - DPM. Damp proofing without moisture limit. Water-free. Very low emissions. Fast setting.

Productinformation

042 EUROBLOCK TURBO

One-component damp proof - DPM - and surface reinforcement coating. Fast damp proofing up to 5 CM %, 98% RF. One component. PU-based.

Productinformation

043 EUROPRIMER ALPHY

Primer specially designed for highly absorbant anydrite floors.

Productinformation

044 EUROPRIMER MULTI

Universal primer, very low emission, emicode EC 1PLUS, universal application, favourable spreading capacity and IMO certification required projects.

Productinformation

044-1 EUROPRIMER MULTI PLUS

Universal primer, dilutable concentrate, fast drying, highly water resistant and ideal before levelling works.

Productinformation

048 EUROPRIMER PLUS

Universal Primer under levelling compound and parquet adhesives, high end, universal, very high water resistance and blocks plasticizer migration.

Productinformation

049 EUROPRIMER ABS

Floor primer, very low emission, emicode EC 1PLUS, user friendly, non-flammable, favourable spreading capacity and high penetration capacity.

Productinformation

050 EUROPRIMER MIX

Dispersion primer and dilutable concentrate.

Productinformation

051 EUROPRIMER QUARTZ

Primer for impervious surfaces, very low emission, emicode EC 1PLUS, ready for use, user friendly, for wall and floor and suitable for underfloor heating systems.

Productinformation

070 EUROPRIMER FILL

Fast and filling primer, priming and filling in one step, fast drying and no quartz sand blinding before leveling on damp proof coats.

Productinformation

078 EUROPRIMER POLARIS

Frost resistance universal primer, water dilutable concentrate for different types of absorbent and non-absorbent subfloors, universal bonding promotor for dense subfloors, deeply penetrating primer for extremely absorbent subfloors, frost resistant and perfect for winter transport.

Productinformation

099 DISPERSION PRIMER

Primer for wall and floor, very low emission, emicode EC 1PLUS, user friendly, favourable spreading capacity, multi-purpose application and for in- and outdoor use.

Productinformation