• Very low emission  
• Emicode EC 1PLUS
• Non-flammable
• Easy and safe to apply
• High initial adhesion strength 

For installing on permanently dry subfloors of:

• linoleum
• carpet
• wall carpet
• cork wall and floor tiles
• bulletin board. 

• 530 Eurosafe Cork is suitable for any type of subfloor that has a good tensile and compression strength. The subfloor should also be even, clean, permanently dry and free from grease and dirt, according to the requirements of BS 8203 or DIN 18 365.
• Only use pervious floor coverings on impervious subfloors.
• When installing impervious floor coverings on impervious subfloors apply a 2 mm levelling compound layer.
• In advance always seek our technical data sheets. In doubt about the application ask for technical advice.

• Apply the adhesive with a regular notched adhesive spreader (Eurocol spreader no. 850/B1).
• Place the material directly into the wet adhesive and roll and/or press thoroughly.
• Remove fresh adhesive spots immediately with water.

Working conditions:
Required surrounding temperature : 18 - 23 °C.
Temperature for material and subfloor : min. 15° - max. 20 ºC.
Relative humidity : 40 - 80%.

Contains methylchloroisothiazolinone and methylisothiazolinone (3:1) and benzisothiazolinone. May produce an allergic reaction.