Choose your country

Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2

Series 8 / Series 8.1

Straight running belts l Pitch 25.4 mm (1 in)
Belts for medium to heavy-duty applications


Series 8 – Excerpt from Prolink Engineering Manual

Design characteristics Series 8

  • Closed hinge design provides high belt pull capacity
  • Rigid module design makes belt suitable for long conveyors
  • Robust design guarantees superior durability
  • Closed solid edge design
  • Flame retardant version available
    (PXX-HC – in line with DiN EN 13501-1)

Design characteristics Series 8.1

Designed for further improvements on noise reduction.

  • The underside of the belt has an improved contact surface area with the slide bars
  • An optimized module and hinge shape allows quiet transition between the slide bars and when entering and leaving the slider bed

Series 8 and Series 8.1 are driven by the same sprockets.
Series 8 and Series 8.1 can be combined and they can use the same range of accessories.


Series 8 - Design characteristics

Basic data

Pitch 25.4 mm (1 in)
Belt width min.38.1 mm (1.5 in)
Width increments12.7 mm (0.5 in)
Hinge pins12.7 mm (0.5 in)
Belt width min. at S8.1-30 FLT76.2 mm (3 in)
Width increments at S8.1-30 FLT12.7 mm (0.5 in)
Belt width min. at S8.1-30 FLT GT191 mm (7.52 in)
Width increments at S8.1-30 FLT GT-

Prolink Series 8 / 8.1 Basic Data EN

S8.1-0 FLT | 0% Opening | Flat top

  • Closed, smooth surface
  • Flat top surface

S8.1-0 FLT

S8.1-0 SRS | 0% Opening | Slip-resistant surface

  • Closed surface
  • Slip-resistant surface, pleasant to walk and kneel on

S8.1-0 SRS

S8.1-0 NSK | 0% Opening | Non skid

  • Closed surface
  • Non-skid surface for increased safety when walking on belt
  • Flat top sections across the belt width for supporting the belt on the return

S8.1-0 NSK1

S8.1-0 NSK2 | 0% Opening | Non skid (Design 2)

  • Closed surface
  • Non-skid surface for increased safety when walking on belt
  • Closed hinges
  • Uninterrupted NSK-structure across the full belt width

S8.1-0 NSK2

S 8-25 RAT | 25% Opening | Radius top

  • Open area (25 %) with rounded contact surfaces
  • radius top belt surface ensures minimum product contact and good release characteristics

S8-25 RAT

S8.1-30 FLT | Open version (30%) | Smooth surface

Open version (30%) | Flat top surface | 53% contact area (Largest opening: 9.7 x 7 mm/0.38 x 0.28 in) | Smooth surface

S8.1-30-FLT

S8.1-30 FLT GT | Open version (30%) | Smooth surface

Open version (30%) | Flat top surface | 53% contact area (Largest opening: 9.7 x 7 mm/0.38 x 0.28 in) | Smooth surface | with guiding tabs, optimized chain guidance in long lines where hygiene is critical

S8.1-30-FLT-GT EN

S8-0 FRT1 | 0% Opening | Friction top surface (Design 1)

  • Closed surface
  • Friction top with cube-shaped High Grip pads
  • Grooves inbetween to improve flexibility and to channel dirt away from the friction surface
  • Closed hinges

S8-0 FRT1

S8-0 RTP A90 | 0% Opening | Roller top A90

  • Closed surface with roller top at 90° to the direction of travel
  • version for low-friction merging of products lateral

S8-0 RTP A90

Pin Retained Rollers

For applications where low back pressure accumulation or product separation is required

S8 PRR

Sprockets

in different sizes with round or square sprocket bore

Series 8 - Sprockets

Profiles

in different heights and designs for inclines

Series 8 - Profiles

Side guards

in different heights for retention of bulk products

Series 8 - Side guards

Hold Down Taps

Hold Down Tabs for additional guiding

Series 8 - Hold Down Taps

Prolink Series 8 Video

Prolink Series 8 – Roller Top

Based on series 8, the RTP A90 type offers a roller top (RTP) with rollers rotating at an angle of 90° to the conveying direction (A90). This guarantees products to slide onto and off the belt sideways with little friction.

Further Information

  • 888 Series 8 EN – Excerpt from Prolink engineering manual

    Series 8
    Excerpt from Prolink Engineering Manual

  • 322 EN – Siegling Prolink Series 8 Roller top

    Flyer Roller Top

  • Datasheet Prolink S8 SPR-SP EN

    S8 SPR-SP
    Datasheet