• Very low emission
• EMICODE EC 1PLUS
• Universal application 
• Favourable spreading capacity
• IMO certification required projects  

Primer for:

• improving the adhesion of levelling compounds and cement-based tile adhesives on all stony surfaces 
• wooden floors 
• old, fixed and water-resistant adhesive residues 
• asphalt floors 
• terrazzo 
• outdoor application under normal circumstances
• ceramic tiles
• self-levelling anhydrite floors 
• power-floated floors. 

• The subfloor must have a good tensile and compression strength. The subfloor should also be smooth, clean, permanently dry and free from grease, dirt and dust, according to the requirements of BS 8203 or DIN 18 365. 
• Adhesion-reducing layers, old material residues must be removed by suitable mechanical measures in accordance with the specifications of DIN 18365/DIN 18356.
• Old fixed floors, such as ceramic tiles, terrazzo, stone floors, must be thoroughly cleaned and sanded matt after drying.
• Not suitable for moisture sensitive subfloors such as chipboard and water-soluble adhesive residues.
• In advance always seek our technical data sheets. In doubt about the application ask for technical advice. 

• Shake the packaging well before use.
• On smooth and impervious surfaces apply 044 Europrimer Multi evenly with a foam roller. For absorbent subfloors use a lambswool roller.
• If required 044 Europrimer Multi can also be applied with a spray-gun.
• Do not walk on the floor during drying time.
• After drying the subfloor can be treated as required.
• Clean tools immediately after use with water.
• Remove fresh spots immediately with water.
• When applying a second coat or in combination with 026 Eurprimer multi, the 044 Europrimer Multi must be fully dried and walkable.

Working conditions:
Intended surrounding temperature : 18 - 23 °C.
Material and subfloor temperature : min. 15° - max. 20 ºC.
Relative humidity : 40 - 70%.

Contains methylchloroisothiazolinone and methylisothiazolinone (3:1). May produce an allergic reaction.