SelectYourLanguage

Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2
Pulldown 2

Forbo Websites

Select a division
Forbo Group
Forbo Flooring Systems
Forbo Movement Systems
CONTACT FAQ

eurocol
886 EUROSEAL FINISHER

886

Ready-to-use, biodegradable finishing fluid for easy smooth finishing of various sealants based on silicone, epoxy, silane (MS) and PU. In a handy spray bottle

886-euroseal-finisher.jpg
  • pdf-product-specification.pdf

    pdf-product-specification.pdf

  • Product Typification
    Ready-to-use, biodegradable finishing fluid for easy smooth finishing of various sealants based on silicone, epoxy, silane (MS) and PU. In a handy spray bottle
    Basis : Soap and water.
    Colour : Transparent.

    Product advantages:
    • Ready to use
    • Low-odour and pH-neutral
    • Biodegradable

  • Performances
    Specific weight : 1.03 kg/l.
  • Application
    Ready-to-use fluid in a handy spray bottle for easy smooth finishing of various sealants based on silicone, epoxy, silane (MS) and PU.
  • Working Process
    Application temperature : From +5° to +40 °C   
    Storage : Dry and frost-free in closed packaging at a temperature between + 5° and +25 °C
    Shelf Life : Minimum 24 months

    * The mentioned values have been established in our laboratory and must be considered as guidelines in view of possible variations in climatic circumstances, subfloor compositions and layer thickness.

    Substrate:
    • Finishing fluid facilitates the smooth finishing of freshly applied sealant joints, also known as wet smoothing.
    • If in doubt about the applications, set up a preliminary test area or contact our Technical Advice department.


    User manual:
    • Apply the sealant evenly with a hand or air pressure sealant gun.
    • Shake the 886 Euroseal Finisher before use.
    • Then finish the sealant within 10 min. (to prevent skin formation) tightly and smoothly using 886 Euroseal Finisher. Use this in combination with a moistened sealant spatula/knife or bevelled PVC pipe.
    • After finishing the sealant joints tightly, rinse the entire surface thoroughly with clean water to remove excess residues of finishing fluid.




  • Environment and health
    MSDS : For detailed safety and environmental information, please refer to our website www.eurocol.nl.


  • Articles
    ArticleDefinitionPackagingEAN-code
    886Euroseal Finisher 500 ml spray bottle 8 710345 886017 
    886Euroseal Finisher12 pieces per box8 710345 886000