041 EUROPRIMER EC

Current-conducting, ready-to-use primer to replace a very extensive copper strip system on a levelled substrate. As a rule, it will not be necessary to apply and earth more than 1 metre of 801 Eurostrip EC per 30 m². Thanks to EMICODE EC 1PLUS (very low emission) also suitable for BREEAM projects. Suitable for indoor use.

Productinformation

523 EUROSTAR TACK EC

Conductive adhesive for PVC and textile, conductive wet-set adhesive, very fast applicable, very high final strenght, multipurpose.

Productinformation

615 EUROSTAR LINO EC

Very low-emission, fast-setting, current-conducting linoleum adhesive for installing current-conducting linoleum (including Ohmex) on a levelled subfloor in combination with 801 Eurostrip EC and 041 Europrimer EC. Conductive resistance: < 3.10 5 Ω. . Thanks to EMICODE EC 1PLUS (very low emission) also suitable for BREEAM projects. Suitable for indoor use.

Productinformation

641 EUROSTAR SPECIAL EC

Very low-emission, fast-setting, conductive adhesive for installing conductive carpet and PVC floor coverings in sheets and tiles and conductive rubber floor coverings in sheets and tiles with a flat back. Conductive resistance: < 3.10 5 Ω. Thanks to EMICODE EC 1PLUS (very low emission) also suitable for BREEAM projects. Suitable for indoor use.

Productinformation

801 EUROSTRIP EC

Self-adhesive copper tape for realising earthing when installing a conductive floor covering, preferably on a levelled subfloor. Possibly in combination with 041Europrimer EC. However, this is not necessary for every type of conductive floor covering.

Productinformation