• Highly economical primer to be diluted with water for use on cement-based, absorbent subfloors (screed) to bind dust and ensure overall equal subfloor absorbency before levelling and adhesive works.
• To be diluted with water, depending on subfloor absorbency (mixing ratio up to 1:4-5 with water).
• For Indoor use.
• Very low VOC emission EMICODE EC 1.

• as a dust-binding primer on absorbent surfaces, before filling or gluing work.

• The substrate must be pressure- and tension-resistant, permanently dry, free of cracks and dust, even and free of layers that reduce adhesion.
• Cracks or joints (except structural expansion joints) are to be closed with Eurocol Europlan 913 Silicate sealing compound.
• In case of defects, objections are to be reported in writing.

• Allow the primer to reach room temperature before application.
• Shake well before use.
• Depending on the absorbency of the substrate and porosity, dilute the dispersion primer with water in a ratio of 1:4 to 1:5 and mix thoroughly.
• As an intermediate primer for Eurocol cementitious levelling compounds, dilute with water at a ratio of 1:7 and mix carefully. Before applying the intermediate primer, the first layer of filler must be completely dry.
• Apply evenly without puddle formation on the professionally prepared substrate. The primer can also be sprayed, protecting adjacent components from contamination.
• The drying time depends on the quantity applied as well as on the room temperature and humidity, and the further use of the material. 

Application conditions: