Design characteristics Series 8

• Closed hinge design provides high belt pull capacity
• Rigid module design makes belt suitable for long conveyors
• Robust design guarantees superior durability
• Closed solid edge design
• Flame retardant version available
  (PXX-HC – in line with DiN EN 13501-1)

Design characteristics Series 8.1

Designed for further improvements on noise reduction.

• The underside of the belt has an improved contact surface area with the slide bars
• An optimized module and hinge shape allows quiet transition between the slide bars and when entering and leaving the slider bed

Series 8 and Series 8.1 are driven by the same sprockets.
Series 8 and Series 8.1 can be combined and they can use the same range of accessories.

Basic data

S8.1-0 FLT | 0% Opening | Flat top

• Closed, smooth surface
• Flat top surface

S8.1-0 SRS | 0% Opening | Slip-resistant surface

• Closed surface
• Slip-resistant surface, pleasant to walk and kneel on

S8.1-0 NSK | 0% Opening | Non skid

• Closed surface
• Non-skid surface for increased safety when walking on belt
• Flat top sections across the belt width for supporting the belt on the return

S8.1-0 NSK2 | 0% Opening | Non skid (Design 2)

• Closed surface
• Non-skid surface for increased safety when walking on belt
• Closed hinges
• Uninterrupted NSK-structure across the full belt width

S 8-25 RAT | 25% Opening | Radius top

• Open area (25 %) with rounded contact surfaces
• radius top belt surface ensures minimum product contact and good release characteristics

S8.1-30 FLT | Open version (30%) | Smooth surface

Open version (30%) | Flat top surface | 53% contact area (Largest opening: 9.7 x 7 mm/0.38 x 0.28 in) | Smooth surface

S8.1-30 FLT GT | Open version (30%) | Smooth surface

Open version (30%) | Flat top surface | 53% contact area (Largest opening: 9.7 x 7 mm/0.38 x 0.28 in) | Smooth surface | with guiding tabs, optimized chain guidance in long lines where hygiene is critical

S8-0 FRT1 | 0% Opening | Friction top surface (Design 1)

• Closed surface
Friction top with cube-shaped High Grip pads
• Grooves inbetween to improve flexibility and to channel dirt away from the friction surface
• Closed hinges

S8-0 RTP A90 | 0% Opening | Roller top A90

• Closed surface with roller top at 90° to the direction of travel
• version for low-friction merging of products lateral

Pin Retained Rollers

For applications where low back pressure accumulation or product separation is required

Sprockets

in different sizes with round or square sprocket bore

Profiles

in different heights and designs for inclines

Side guards

in different heights for retention of bulk products

Hold Down Taps

Hold Down Tabs for additional guiding